![]() Of those aren’t the only solution, at the end a command line tool would be sufficient as long as you know the target device’s MAC address. That’s it, this is how you can wake up Mac or Windows from each other with WOL packets. Keep in mind of the use cause and their limitations when use this to wake up Mac. If your Mac asleep, sending a magic WOL packet would wake up the Mac, however, if your Mac doesn’t have an Ethernet connection then when it was completely powered off you will not be able to wake up the Mac. Then select the Power Management tab and check off all three boxes. Expand Network adapters in the device tree, select your Ethernet adapter, right-click it and then select Properties. Press Windows key + X and select Device Manager. ![]() Because WOL operates on the Data-Link layer, IP addresses and DNS addresses are meaningless to the WOL process (though they are used for status checks and shutdown). I suggest you to follow the steps below and check if it helps. Go to System Preferences > Energy Saver > (check) Wake for Wi-Fi network access. Wake-on-LAN uses a special packet called a magic packet, which is broadcast to the network to wakeup hosts. We have covered tools here and here on Windows for this to work, the important thing to remember is to make sure you have the correct settings on your Mac to accept WOL magic packet. ![]() Simply the auto discovery feature is slow and not robust enough to find the target device without manually input their IP and Mac address. From couple utilities I’ve tried, they are not as easy to use as Mac’s WakeOnLan. There are more tools to choose from to send WOL magic packets on Windows than Mac, but it doesn’t mean they are better than the Mac. Once you find the target Windows device with matching IP address and Mac address, hit “Wake Up!” will send the WOL magic packet to that device and if your Windows machine is configured properly, it will start up. But this isn’t a required step to make it work. It will try its best to associate and discover the device type, in the case when it couldn’t tell what kind device they are you can manually configure and set their device type. After you download the app, run the app, it will auto scan all the available devices from your local network. The best GUI tool I found is called WakeOnLan. It’s pretty straightforward, we just need to grab a GUI tool for Mac that will send the magic WOL packets through your local networks. If WOL concept is new to you, you should check out what it means to wake up a computer from a local network. In today’s post, we are going to cover how to wake up a Windows machine from a Mac and vice versa, waking up a Mac machine from Windows. Now the tool will start sending the magic packet to the wake-up device.We’ve covered quite a few post related to Wake-On-Lan. That’s it, and you are done with the process. Select the Wake Up Selected Computers option. Now right-click on the remote computer. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |